Introduction. clinker construction is an ancient method used for constructing boat hulls by overlapping the wooden planks along their edges. it is said that vikings, explorers and pirates from europe in the 300 c.e. introduced this method of hull construction.. Clinker is a method of constructing hulls of boats by fixing wooden planks so that the planks overlap along their edges. the overlapping joint is called a land. if the plank is too short for the hull, it would be necessary to extend the plank by joining with another piece of wood (xxx joints are common).. This is a nice example of a standard issue english clinker rowboat. it is boat building in its purest and most challenging form and will appeal to those most absorbed by the process of building itself..
Clinker boat design. discussion in 'boat design then i modified the design so it will be a better boat for my particular purposes. once i have finished designing a hull in the software, i use the feature that creates a cutting pattern for each panel. of the laps should have some relation to the size of the boat since the eye expects to. A clinker plank is overlaid the plank below for a lap (clinker is also known as lapstrake construction, as strake is another name for a plank and lap describing the joint between each plank).. Boat plans. we sell plans of most of the boats that we have designed. we can also design a boat for you if what you want isn’t already here. our designs range from 9′ clinker dinghies to 200 ton schooners and everything in between..
0 komentar:
Posting Komentar